Gears Oils - MustonLube Specialty Lubricants

Syngear SH-7000 Series

mustonadmin — Wed, 11 May 2022 15:11:12 +0000

Summit Syngear® SH®-7000 Series synthetic gear and bearing oils are formulated using synthesized hydrocarbon fluid and select additives to enhance oxidation resistance and provide maximum protection against wear, rust, corrosion and foaming. These synthesized hydrocarbon fluids (SHF) provide significantly better thermal and oxidation stability, as well as increased protection against the loss of viscosity than do conventional good quality mineral oils. The high inherent viscosity index of these oils provides higher viscosities and therefore greater film thickness at higher temperatures and lower viscosities for easy start-up and minimal internal friction at lower temperatures. The low coefficient of friction of the Summit Syngear® SH® Series lubricants substantially reduces power consumption and gearbox operating temperature, further prolonging the useable life of this lubricant.

RECOMMENDED USES

Summit Syngear® SH® Series lubricants are recommended for use under severe high or low temperature conditions when lubricating industrial enclosed gears and heavily loaded plain or roller element bearings. They are particularly recommended for applications where high oil temperatures result in short oil life or high maintenance costs. Summit Syngear® SH®-7032 through Syngear® SH®-71000 are also recommended for use in applications where the corrosion of yellow metals is a concern as these lubricants do not contain additives which tend to attack metals such as brass, bronze or copper. The Summit Syngear® SH®-Series lubricants are compatible with essentially all seal materials, plastics and paint, including nitrile Buna N, neoprene, Viton®, teflon, polyethylene, polyurethane ether, fluorocarbon, polyacrylate, polysulfate, ethylene acrylic, epoxy, plastisol, PVC, acrylic paint and lacquer.

The post Syngear SH-7000 Series first appeared on MustonLube Specialty Lubricants.

Syngear FG PG Series

mustonadmin — Tue, 10 May 2022 14:10:37 +0000

Summit Syngear® Food Grade PG Series synthetic oils are polyglycol-based products for use in enclosed gear, bearings, and compressors where conditions demand the unique properties of these fluids. Use these lubricants where there is the potential for incidental contact with food or food packaging. Better wear protection, thermal and oxidation stability and reduced sludge and deposit formation insure enhanced performance when compared with petroleum-based lubricants. These lubricants are NSF registered and meet USDA (H1) guidelines (lubricants with incidental food contact) for use in food plants. Summit is an ISO 21469 certified facility. So not add directly to food.

RECOMMENDED USES

The Syngear® Food Grade PG Series are built specifically for use in enclosed gear, bearings, and compressors in situations where there is the potential for incidental contact with food or food packaging. These lubricants are incompatible with petroleum oils. Care should be taken to prevent the two types of fluids from being mixed.

The post Syngear FG PG Series first appeared on MustonLube Specialty Lubricants.

Summit MultiPump SPO Series

mustonadmin — Sun, 08 May 2022 22:12:03 +0000

Summit MultiPump SPO Series gear lubricants are formulated with synthetic base stocks and fortified with select additive systems to enhance their exceptional performance. The PAO base fluid used has outstanding oxidation and thermal stability, naturally high viscosity index and excellent low temperature pumpability and fluidity. The unique additive system used provides increased oxidation stability, extreme pressure properties, and maximum protection against wear, rust, corrosion and foaming.
Summit MultiPump SPO synthetic gear lubricants have proven to reduce friction, thereby reducing the input power to operate the equipment or increasing the available power output. This product line meets the requirements of U.S. Steel 224 specification, AGMA 9005-D94 specification, DIN 51517 Part 3 CLP specification and API GL-4 Gear Service Category.

RECOMMENDED USES

Summit MultiPump SPO Series gear lubricants are recommended for use in all types of enclosed gearing with specific focus on Multiplex Pumps. These lubricants are ideal for the complex tribological requirements of multiplex pump such as high temperatures, heavy loads and extreme environments. Summit MultiPump SPO Series gear lubricants are compatible with most seal materials, paints and plastics, including nitrile buna N, neoprene, Viton®, Teflon®, polyethylene, polyurethane ether, fluorocarbon, polyacrylate, polysulfide, ethylene acrylic, epoxy, plastisol, PVC, acrylic paint and lacquer.

The post Summit MultiPump SPO Series first appeared on MustonLube Specialty Lubricants.

Summit UniPar FG Series

mustonadmin — Sun, 08 May 2022 22:02:16 +0000

UniPar FG Series gear oils are specially formulated for gear systems operating in the food service and packaging industries. UniPar FG Series lubricants are NSF Registered and meet USDA 1998 (H-1) guidelines (lubricants with incidental food contact). In addition, these gear oils are Kosher approved. UniPar FG lubricants are fortified with oxidation inhibitors as well as anti-wear/EP additives to pass the highest stages of the FZG test.

RECOMMENDED USES

UniPar FG Series gear oils are ideal for the lubrication of production equipment in beverage canning, bottling operations, meat and poultry processing, dairy operations, fruit and vegetable processing, bakeries, and pharmaceutical plants.

The post Summit UniPar FG Series first appeared on MustonLube Specialty Lubricants.

Summit Syngear FG Series

mustonadmin — Thu, 05 May 2022 16:25:52 +0000

The Syngear® FG Series gear oils are specially formulated for gear systems operation in the food service and packaging industry. These fully synthetic lubricants are NSF Registered and
meet USDA 1998 (H-1) guidelines (lubricants with incidental food contact). Syngear® FG Series lubricants are Kosher/Halal certified.

Summit is an ISO 21469 certified facility.
Syngear® FG lubricants are fortified with oxidation inhibitors as well as anti-wear/EP additives to pass the highest stages of the FZG test. They are extended life lubricants and have the same excellent software compatibility as the Summit Syngear® Series gear oils

The post Summit Syngear FG Series first appeared on MustonLube Specialty Lubricants.

Summit Syngear WT Series

mustonadmin — Fri, 08 Apr 2022 22:05:29 +0000

Summit Syngear® WT Series lubricants are fully synthetic high performance gear oils enhanced with new generation anti-micropitting additives. The PAO base oil has outstanding oxidation and thermal stability, naturally high viscosity index and excellent low temperature pumpability and fluidity. The additive system not only minimizes scuffing wear, but offers a high level of resistance to micropitting fatigue. High load carrying capability and low sludge formation make these superior lubricants a choice for many industrial applications. Syngear® WT Series provides maximum protection against rust, corrosion, and foaming.

APPLICATION
Summit Syngear® WT Series are recommended for highly loaded enclosed gearing as well as plain and rolling element bearings. These shear stable lubricants resists damage to gear teeth caused by repeated shock loads. Syngear® WT Series lubricants are ideal for wind turbine gearboxes, mine hoist gearboxes, crane gearing, and other enclosed gearing which requires micropitting resistance. Highly loaded gearboxes in the steel, paper and cement industries are natural applications. These extended life oils perform very well in extreme environments.

The post Summit Syngear WT Series first appeared on MustonLube Specialty Lubricants.