RECOMMENDED USES

Xtra-Clean Degreaser is specially formulated for cleaning oily and greasy surfaces such as: oil rigs, engines, oilside of heat exchangers, pipes, cleaning vats, conveyors, exhaust stains, machines, metal stock welding equipment and greasy floors. Xtra-Clean gives new meaning to industrial strength.

The post Summit Xtra-Clean Degreaser first appeared on MustonLube Specialty Lubricants.

Advances in chemistry and technology means a “green” cleaner is no longer a weak cleaner. EnviroTech® Green Cleaner is a powerful degreaser and is proven safe and effective. Product benefits include:

• Superior penetration and removal of oily, greasy particulate soils
• Ability to clean where mechanical or agitation is restricted
• Self-splitting: oils rapidly break from used solution
• Readily biodegradable
• No VOCs or phosphates
• Non-sensitizer to skin
• Excellent rinsing properties
• Very low streak/smear profile

RECOMMENDED USES

This fast-acting cleaner and degreaser combines green emulsion surfactants and builders to handle tough cleaning. EnviroTech® Green Cleaner removes oil residue and hydrocarbon buildup such as grease, motor oil, tar, fuel, fats, heavy soil, and much more. It’s strong enough to reduce grease trap problems during heavy cleaning. EnviroTech® Green Cleaner has been proven an effective replacement for many widely used chemistries in cleaners that are harmful to the enviroment. EnviroTech Green Cleaner is:

• EPA Certified
• Non-flammable
• Non-corrosive
• NSF Registered
• Biodegradable
• Phosphate-free
• EnviroTech® Green Cleaner is a U.S. EPA “Safer Choice Certified Degreaser”* & NSF Food Grade Registered.

*EPA/Safer Choice recognition does not constitute endorsement of these products. The Safer Choice logo signifies that the products’ formulas, as Summit has represented it to the EPA, contain ingredients with more positive human health and environmental characteristics than conventional products of the same type. EPA/Safer Choice relies solely on Summit,  its integrity and good faith, for information on the products’ composition, ingredients and attributes. EPA/Safer Choice has not independently identified, that is, via chemical analysis, the ingredients in the products’ formula, nor evaluated any of Summit non-ingredient claims. EPA/Safer Choice provides its evaluation only as to the products’ human health and environmental characteristics, as specified in the Standard and based on currently available information and scientific understanding.”

DOWNLOAD BROCHURE

The post EnviroTech Green Cleaner first appeared on MustonLube Specialty Lubricants.

When used as directed, Alimex is non-corrosive and will not affect the following: aluminum, stainless steel, carbon steel, brass, admiralty metal, copper, iron, lead, PVC plastic, polyethylene, rubber leather, and most materials found in water-wetted equipment. Alimex is not recommended for zinc, galvanized steel, or alloys of magnesium.

Alimex is non-toxic, non-corrosive, and non-flammable when used as directed. It is biodegradable and can be safely put into the sewer in the spent condition. It also has a built-in indicator which changes color when the solution is 95+ percent spent. When the solution begins to turn blue, it should be added to or changed if the equipment is not clean.

RECOMMENDED USES

Alimex is a water-based chemical descaler formulated for the safe removal of scale from water-wetted aluminum surfaces. Aided by wetting agents, corrosion inhibitors and degreasing agents, it effectively loosens and removes deposits from critical aluminum components such as heat exchangers, fin fans, and any other aluminum coated surface.

The post Summit Alimex Descaler first appeared on MustonLube Specialty Lubricants.

Sublime® descaler comes in a pale yellow color that changes to a deep bluish-purple when it is spent. The advantages to this color change are:

1. Know when the solution is spent and should be discarded
2. Don’t spend time circulating a spent solution
3. The color change occurs at a pH of 5.8 to 6.0 which is well within the safe disposal range of most of the current governmental waste regulations.

If the equipment is clean and Sublime® has not changed color, you can save it and use it again.

RECOMMENDED USES

Sublime® Descaler is designed to penetrate and remove encrusted lime scale, rust, corrosion products and dirt from water-wetted surfaces in process equipment, commercial and industrial applications. Sublime® is most effectively used by circulating through the equipment to be cleaned. When possible, circulation should be up-flow. Sublime® can also be used by filling the equipment to be cleaned and allowing it to set until scale has disappeared. The cleaning operation normally takes two to six hours. It is non-toxic, non corrosive, non-flammable and non-hazardous when used as directed. Sublime® descaler is registered as NSF-A3 and U.S.D.A. approved as specified in 40 CRF 261. and D.O.T. 173.240(a).

The post Summit Sublime Descaler first appeared on MustonLube Specialty Lubricants.

Varnasolv FG is a lubrication system cleaner designed to remove varnish and sludge in equipment used in the food & beverage industry.  The use of petroleum lubricants in rotary screw compressors, rotary vane compressors and other high temperature equipment, results in varnish and carbon formation. The varnish and carbon deposited throughout the equipment can cause many serious operational problems, resulting in excessively high maintenance costs.

Varnasolv FG is built for food grade applications and is NSF HX-1 registered. This eliminates the need to run the compressor unloaded when flushing a unit in a food processing facility. Varnasolv FG reduces the problems caused by varnish and carbon. Using Varnasolv FG eliminates the need for disassembling the equipment for cleaning.

Varnasolv FG should be added to the existing lubricant at a 10% concentration to remove and suspend varnish while the equipment is running. For maximum benefit, use Varnasolv FG before each lubricant change.

Additional applications for Varnasolv FG include cleaning hydraulic systems,  and high temperature chains. Varnasolv FG can also be used for cleaning Heat Transfer systems with temperatures up to 400°F.

How to use Varnasolv FG:
Cleaning Hydrocarbon Deposits from Equipment
Initial Clean-Out Method
Add one gallon of Varnasolv FG concentrate to each ten gallons of oil in the unit, first draining enough oil to allow adding the Varnasolv FG. Continue to run the equipment for 20 to 40 hours, allowing the treated oil to disperse and suspend the varnish. To avoid redepositing the suspended contaminants, drain the oil while warm and replace filters.  Refill with new oil.

RECOMMENDED USES

Varnasolv FG is a lubrication system cleaner designed to remove varnish and sludge in equipment used in the food & beverage industry.

The post Varnasolv FG first appeared on MustonLube Specialty Lubricants.

RECOMMENDED USES

Flushing oil is not recommended as an operational fluid. To flush a loaded system DLS®-100S is recommended.

The post Summit Flushing Oil first appeared on MustonLube Specialty Lubricants.

Summit DSL®-100S is an excellent lubricant for the following applications:

• High pressure Seismic compressors
• Reciprocating compressor cylinders
• Low and High temperature lubrication
• General lubrication

RECOMMENDED USES

Summit DSL®-100S can be used as a flushing oil where the compressor needs to be flushed while running under load. It does not contain polymers commonly used as thickeners in ester based oils.

The post Summit DSL®-100S first appeared on MustonLube Specialty Lubricants.